Department of  Engineering & Architecture  -  DIA

 

Viale delle Scienze, 181/A - 43124 PARMA - ITALY

  

 

 

HOME TEACHING RESEARCH PUBLICATIONS LINKS NEWS

 

 

Publications

 

Roberto Brighenti  Ph.D.

 

Associate Professor of Solid and Structural Mechanics

 

   

Papers in International Journals 

 

2023

 

2022

 

2021

 

2020

 

2019

 

2018

 

2017

 

2016

 

2015

 

2014

 

2013

 

2012

 

2011

 

2010

  • R. Brighenti. Damage increment accumulation approach for multiaxial fatigue life prediction. Int. J. of Materials Engineering and Technology, ISSN: 0975-0444, Vol. 4, No. 1, pp. 15-37, 2010.

  • R. Brighenti. Influence of a central straight crack on the buckling  behaviour of thin plates under tension, compression or shear loading. Int. J. of Mech. and Mat. in Design, Vol. 6, pp. 73-87, 2010 (doi: 10.1007/s10999-010-9122-6).

  • A. Carpinteri, R. Brighenti, S. Vantadori. Influence of the cold-drawing process on fatigue crack growth of a V-notched round bar. Int. J. Fatigue, Vol. 32, pp. 1136-1145, 2010 (doi: 10.1016/j.ijfatigue.2009.12.014).

  • R. Brighenti, A. Carpinteri. Some considerations on failure of solids and liquids.  Int. J. Strength of Materials (ISSN: 0039-2316 (print version), ISSN: 1573-9325 (electronic version), Vol. 42, No. 2, pp. 154-166, 2010.

  • A. Carpinteri, R. Brighenti. Fracture behaviour of plain and fiber-reinforced concrete with different water content under mixed mode loading.  Int. J. Materials & Design, Vol. 31, pp. 2032-2042, 2010 (doi:10.1016/j.matdes.2009.10.021).

 

2009

  • R. Brighenti. Fracture behaviour of brittle fibre-reinforced solids by a new FE formulation. Int. J. Composite Structures, Vol. 91, pp. 324-336, 2009 (doi:10.1016/j.compstruct.2009.05.012).

  • R. Brighenti. Buckling sensitivity analysis of cracked thin plates under membrane tension or compression. Int. J. Nuclear Engng and Design, Vol. 239, pp. 965-980, 2009 (doi: 10.1016/j.nucengdes.2009.01.008).

  • A. Carpinteri, R. Brighenti, S. Vantadori. Notched double-curvature shells with cracks under pulsating internal pressure. Int. J. of  Pressure Vessel and Piping, Vol. 86, No. 7, pp. 443-453, 2009 (doi:10.1016/j.ijpvp.2008.12.007).

  • A. Carpinteri, R. Brighenti,  A new continuum F.E. approach for fracture mechanics discontinuous problems. Int. J. Computational Materials Science, Vol. 45, No. 2, pp. 367-377, 2009 (doi:10.1016/j.commatsci.2008.10.008).

 

2008

  • R. Brighenti. A new discontinuous F.E. formulation for crack path prediction in brittle solids. Int. J. of Solids and Structures, Vol. 45, pp. 6501-6517, 2008 (doi:10.1016/j.ijsolstr.2008.08.008).

  • A. Carpinteri, R. Brighenti. Fracture and fatigue properties of metallic alloys S275 J2 and Al7075 T6 at low temperatures. Int. J. of Materials Science, Vol. 43, No. 14, pp. 4780-4788, 2008 (doi: 10.1007/s10853-008-2675-1).

  • A. Carpinteri, R. Brighenti, A. Davoli, S. Vantadori. A micromechanical model for the prediction of the temperature fracture behaviour dependence in metallic alloys. Int. J. Engng Fract. Mech., Vol. 75, No. 12, pp 3646-3662, 2008 (doi:10.1016/j.engfracmech.2007.09.009).

 

2007

  • A. Carpinteri, R. Brighenti, S. Vantadori, D. Viappiani. Static crack extension prediction in aluminium alloy at low temperature. Int. J. Engineering Fracture Mechanics, Vol. 75/3-4, pp. 510-525, 2007 (doi: 10.1016/j.engfracmech.2007.05.001).

  • A. Carpinteri, R. Brighenti, S. Vantadori, D. Viappiani. Sickle-shaped crack in a round bar under complex mode I loadings. Int. J. Fatigue and Fracture of Engineering Materials and Structures, Vol. 30, No. 6, pp. 524-534, 2007 (IDS Number: 177AQ ISSN: 8756-758X, doi: 10.1111/j.1460-2695.2006.01125.x).

  • R. Brighenti. Patch repair design optimisation for fracture and fatigue improvements of cracked plates. Int. J. of Solids and Structures, Vol. 44, No. 3-4, pp. 1115-1131, 2007 (doi:10.1016/j.ijsolstr.2006.06.006).

 

2006

  • A. Carpinteri, R Brighenti, S. Vantadori. Notched shells with surface cracks under complex loading. Int. J. of Mechanical Sciences, Vol. 48, pp. 638-649, 2006 (doi:10.1016/j.ijmecsci.2006.01.004).

  • R. Brighenti, A. Carpinteri, S. Vantadori. A genetic algorithm applied to optimisation of patch repairs for cracked plates. Int. J. of Computer Methods in Applied Mechanics and Engineering, Vol. 196, pp. 466-475, 2006 (doi:10.1016/j.cma.2006.07.004).

  • A. Carpinteri, R Brighenti, S. Vantadori. Surface cracks in notched round bars under cyclic tension and bending. Int. J. of Fatigue, Vol. 28, No. 3, pp. 251-260, 2006 (doi:10.1016/j.ijfatigue.2005.05.006).

 

2005

  • R. Brighenti, Application of the element-free Galerkin meshless method to 3-D fracture mechanics problems, Int. J. Engineering Fracture Mechanics, Vol. 72, No. 18, pp. 2808-2820, 2005 (doi:10.1016/j.engfracmech.2005.06.002).

  • R. Brighenti, Numerical buckling analysis of compressed or tensioned cracked thin-plates. Int. J. Engineering Structures, Vol. 27, No. 2, pp. 265-276, 2005 (doi:10.1016/j.engstruct.2004.10.006).

  • R. Brighenti, Fibres distribution content optimisation in fibre-reinforced composite by a genetic algorithm, Int. J. Composite Structures, Vol. 71, No. 1, pp. 1-15, 2005 (doi:10.1016/j.compstruct.2004.09.013).

  • A. Carpinteri, R. Brighenti, H.J. Huth, S. Vantadori, Fatigue growth of a surface crack in a welded T-joint. Int. J. of Fatigue, Vol. 27, No. 1, pp. 59-69, 2005 (doi:10.1016/j.ijfatigue.2004.05.007).

  • R. Brighenti, Buckling of cracked thin-plates under tension and compression, Int. J. Thin-Walled Structures, Vol. 43, No. 2, pp. 209-224, 2005 (doi:10.1016/j.tws.2004.07.006).

 

2004

  • R. Brighenti, Optimum patch repair shapes for cracked members, Int. J. of Mechanics and Materials in Design, Vol. 1, No. 4, pp. 365-381, 2004 (ISSN: 1569-1713 (Print) 1573-8841 (Online), doi:10.1007/s10999-005-0525-8).

  • R. Brighenti, A mechanical model for fiber reinforced composite materials with elasto-plastic matrix and interface debonding. Int. J. of Computational Materials Science, Vol. 29, pp. 475-493, 2004 (IDS Number: 809JV, ISSN: 0927-0256, doi: 10.1016/j.commatsci.2003.12.006).

  • R. Brighenti, Numerical modelling of the fatigue behaviour of fiber reinforced composites,  Int. J. of Composite Part B: Engineering, Vol. 35/3, pp. 197-210, 2004 (doi:10.1016/j.compositesb.2003.10.003).

  • A. Carpinteri, R. Brighenti, S. Vantadori,  A numerical analysis on the interaction of twin coplanar flaws. Special Issue on “Advances in Fracture and Damage Mechanics” of the Int. J. Engineering Fracture Mechanics, Vol. 71, No. 4-6, pp. 485-499, 2004 (doi:10.1016/S0013-7944(03)00040-7).

 

2003

  • A. Carpinteri, R. Brighenti, S. Vantadori, Circumferentially notched pipe with an external surface crack under complex loading. Int. J. of Mechanical Sciences, Vol. 45, pp. 1929-1947, 2003 (doi:10.1016/j.ijmecsci.2004.02.007).

 

2001

  • R. Brighenti,  External longitudinal flaws in pipes under complex loading. Int. J. of Pressure Vessels Technology, Vol. 123, No. 1, pp. 139-145, 2001 (IDS Number: 412QX,  ISSN: 0094-9930).

 

2000

  • A. Carpinteri, R. Brighenti, A. Spagnoli,  External surface cracks in shells under cyclic internal pressure. Fatigue and Fracture of Engineering Materials and Structures, Vol. 23, No. 6, pp. 467-476, 2000 (IDS Number: 349PG, ISSN: 8756-758X).

  • R. Brighenti,  Surface cracks in shells under different hoop stress distributions. Int. J. of Pressure Vessels and Piping, Vol. 77, pp. 503-509, 2000 (doi:10.1016/S0308-0161(00)00051-X).

  • R. Brighenti,  Axially-cracked pipes under pulsating internal pressure.  Int. J. of Fatigue, Vol. 22, No. 7, pp. 559-567, 2000 (doi:10.1016/S0142-1123(00)00035-9).

  • A. Carpinteri, R. Brighenti,  A Three-parameter model for fatigue behaviour of circumferential surface flaws in pipes.  Int. J. of Mechanical Sciences, Vol. 42, pp. 1255-1269, 2000 (doi:10.1016/S0020-7403(99)00083-1).

  • A. Carpinteri, R. Brighenti, A. Spagnoli,  A fracture plane approach in multiaxial high-cycle fatigue of metals. Fatigue and Fracture of Engineering  Materials and Structures, Vol. 23, pp. 355-364, 2000 (IDS Number: 324XR, ISSN: 8756-758X).

  • A. Carpinteri, R. Brighenti, A. Spagnoli, Fatigue growth simulation of part-through flaws in thick-walled pipes under rotary bending. Int. J. of Fatigue, Vol. 22, No. 1, pp. 1-9, 2000 (doi:10.1016/S0142-1123(99)00115-2).

 

1999

  • A. Carpinteri, R. Brighenti, E. Macha, A. Spagnoli, Expected principal stress directions under multiaxial random loading. Part II: numerical simulation and experimental assessment through the weight function method. Int. J. of Fatigue, Vol. 21, No. 1, pp. 89-96, 1999 (doi:10.1016/S0142-1123(98)00047-4).

  • A. Carpinteri, E. Macha, R. Brighenti, A. Spagnoli, Expected principal stress directions under multiaxial random loading - Part I: Theoretical aspects of the weight function method. Int. J. of Fatigue, Vol. 21, No. 1, pp. 83-88, 1999 (doi:10.1016/S0142-1123(98)00046-2).

 

1998

  • A. Carpinteri, R. Brighenti,  Stress field near a notch root under pure bending. Physicochemical Mechanics of Materials, Vol. 34, No. 5, pp. 43-48, 1998.

  • A. Carpinteri, R. Brighenti, A. Spagnoli,  Surface flaws in cylindrical shafts under rotary bending. Fatigue and Fracture of Engineering Materials and Structures, Vol. 21, No. 9, pp. 1027-1035, 1998 (IDS Number: 143AR, ISSN: 8756-758X).

  • A. Carpinteri, R. Brighenti,  Circumferential surface flaws in pipes under cyclic axial loading.  Engineering Fracture Mechanics, Vol. 60, No. 4, pp. 383-396, 1998 (doi:10.1016/S0013-7944(98)00036-8).

  • A. Carpinteri, R. Brighenti, A. Spagnoli,  Part-through cracks in pipes under cyclic bending.  Nuclear Engineering and Design, Vol. 185,  pp. 1-10, 1998 (doi:10.1016/S0029-5493(98)00189-7).

 

1997

  • A. Carpinteri, R. Brighenti,  Fatigue propagation of surface flaws in round bars: a three-parameter theoretical model. Fatigue and Fracture of Engineering Materials and Structures, Vol. 19, N. 12, pp. 1471-1480, 1996 (IDS Number: WA031, ISSN: 8756-758X).

 

1996

  • A. Carpinteri, R. Brighenti, A. Spagnoli,  Size effect in beams with rounded-tip V-notch.  Material Science, Vol. 32, No. 3, pp. 325-331, 1996.

  • A. Carpinteri, R. Brighenti,  Part-through cracks in round bars under cyclic combined axial and bending loading. Int. J. of Fatigue, Vol. 18, No. 1, pp. 33-39, 1996 (doi:10.1016/0142-1123(95)00076-3).

 

1995

  • R. Cerioni, R. Brighenti, G. Donida.  Use of incompatible displacement mode in a finite element model to analyze the dinamic behavior of unreinforced masonry panels. Computers & Structures, Vol. 57, No. 1, pp. 47-57, 1995 (doi:10.1016/0045-7949(94)00590-Y).

 

Books 

 

 

Chapters in International Books

  • J.L. Curiel-Sosa, R. Brighenti, M.C. Serna Moreno, E. Barbieri. Computational techniques for simulation of damage and failure on composites. Chapter 15 of the book Structural Integrity and Durability of Advanced Composites, edited by Prof. Beaumount (Cambridge), Woodhead-Elsevier publisher, 2014.

  • R. Brighenti, A micromechanical model and reinforcing distribution optimisation approach for fibre-reinforced materials. Chapt. Of the Volume Fiber Reinforced Composites, Editor Qingzheng (George) Cheng, Nova Science Publishers, Inc., Hauppauge, NY, 2012, pp. 527-569, ISBN: 978-1-61470-303-7 (printed), ISBN 978-1-61470-433-1 (e-book).

  • R. Brighenti, Computational fracture mechanics: a novel discontinuous-like FE approach for brittle solids.  Chapt. 6 of the Volume  Advances in Mechanics Research Vol. 1, Editor Jeremy M. Campbell,  Nova Science Publishers, Inc., Hauppauge, NY, 2010, pp. 231-264 , ISBN: 978-1-61728-105-1 (printed), ISBN: 978-1-61728-704-6 (e-book).

  • A. Carpinteri, E. Macha, R. Brighenti, A. Spagnoli, Critical fracture plane under multiaxial random loading by means of Euler angles averaging.   Chapt. of the volume Multiaxial Fatigue and Fracture, pp. 166-178, Editor E. Macha, W. Bedkowski and T. Lagoda,  Elsevier Science Ltd., Oxford, U.K., 1999.

  • A. Carpinteri, R. Brighenti, A. Sanguanini, A. Spagnoli,  Part-through cracked structures under cyclic loading.  Capitolo 12 del volume Reliability  Assessment of Cyclic Loaded Engineering Structures, pp. 65-99, Editor R.A. Smith, Kluwer Academic Publishers, London, U.K., 1997.

  • A. Carpinteri, R. Brighenti,  Crack propagation under fatigue loading. Capitolo 12° del libro:  Fatigue in Offshore Structures, Editors W.D. Dover   e A.G. Madhava Rao, pp. 359-396, Oxford & IBH Publishing Co., New Delhi, India, 1996.2014-15)

  

 

 

Address

Dept. of Engineering & Architecture

Viale delle Scienze, 181/A - 43124 Parma, ITALY

Building No. 10, 1st floor   (Map)

 

Tel.                 +39.0521.905910
Fax                 +39.0521.905924
e-mail:            brigh@unipr.it
Web   :            http://www.brighenti.unipr.it

  

University of Parma

 

Via Universita' 12

43121 Parma - ITALY

ph. +39 0521 902111

 

 

        

Campus Map

2020.  All Rights Reserved.  Design by Roberto Brighenti      -      Last update:  29-10-23